logo
Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd
προϊόντα
Σπίτι /

προϊόντα

1J80 Soft Magnetic Alloy Precision Alloy Strip with High Magnetic Permeability Low Core Loss and 0.1~10mm Diameter

Λεπτομέρειες προϊόντων

Τόπος καταγωγής: Κίνα

Μάρκα: Tankii

Πιστοποίηση: ISO9001 Rohs

Αριθμό μοντέλου: 1J80

Όροι πληρωμής & ναυτιλίας

Ποσότητα παραγγελίας min: 10 κιλά

Τιμή: Διαπραγματεύσιμα

Συσκευασία λεπτομέρειες: ξύλινη θήκη

Χρόνος παράδοσης: 15-25 ημέρες

Όροι πληρωμής: L/C, T/T, Western Union

Δυνατότητα προσφοράς: 3000tons το χρόνο

Πάρτε την καλύτερη τιμή
Επικοινωνήστε τώρα
Προδιαγραφές
Επισημαίνω:

1J80 soft magnetic alloy strip

,

precision alloy magnetic strip

,

high performance soft alloy strip

Πρότυπο.:
1J80
Κατάσταση:
Μαλακό / σκληρό
Πιστοποιητικό:
Μαγνητική (Διαπερατότητα και Μαγνητική Επαγωγή)
Διάμετρος:
0.1~10mm
Πακέτο μεταφοράς:
ξύλινη θήκη
Παραγωγική ικανότητα:
3000 τόνοι/έτος
Κωδικός HS:
750522000
Πρότυπο.:
1J80
Κατάσταση:
Μαλακό / σκληρό
Πιστοποιητικό:
Μαγνητική (Διαπερατότητα και Μαγνητική Επαγωγή)
Διάμετρος:
0.1~10mm
Πακέτο μεταφοράς:
ξύλινη θήκη
Παραγωγική ικανότητα:
3000 τόνοι/έτος
Κωδικός HS:
750522000
Περιγραφή
1J80 Soft Magnetic Alloy Precision Alloy Strip with High Magnetic Permeability Low Core Loss and 0.1~10mm Diameter

Soft magnetic alloys 1J80 / FeNi 80 / Ni80Cr3Si:

Mainly used in two areas for energy conversion and information processing

In the power industry, mainly in the high magnetic field has a high magnetic induction and low core loss of the alloy. In the electronics industry, mainly at low or medium alloy having a high magnetic permeability and low coercive force. At high frequencies shall be made on a thin strip or alloy higher resistivity. Usually with sheet or strip.

Soft magnetic materials in exchange for use, due to the alternating magnetic eddy currents are induced inside the material, resulting in the loss, the smaller the resistance of the alloy, the greater the thickness, the higher the frequency of the alternating magnetic field, eddy current losses greater, magnetic reduce more. For this, the material must be made thinner sheet (tape), and the surface coated with an insulating layer, or the use of certain methods to the surface to form an oxide insulating layer, such alloys commonly used magnesium oxide electrophoresis coating.

Iron-nickel alloy mostly in the alternating magnetic field use, mainly for yoke iron, relay, Small Power Transformers and Magnetically shielded.

composition C P S Mn Si
Content(%) 0.03 0.02 0.02 0.60~1.10 1.10~1.50
composition Ni Cr Mo Cu Fe
Content(%) 79.0~81.5 2.60~3.00 - ≤0.2 Bal
Παρόμοια προϊόντα
Στείλετε την έρευνά σας
Παρακαλώ μας στείλετε το αίτημά σας και θα απαντήσουμε σε σας το συντομότερο δυνατό.
Στείλετε